LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node (915 MHz)

$55.36

Description

Description

  • Dragino LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node (915 MHz)
  • Features an open-source product
  • Designed for outdoor use
  • Powered by Li/SOCl2 battery
  • Based on SX1276 / SX1278
  • Provides ultra-long range spread spectrum communication

The LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node (915 MHz) is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by Li/SOCl2 battery for long term use. LSN50 is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions.

LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node (915 MHz) - Click to Enlarge

LSN50 is an open-source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found in ST site for rapid development. It helps users to turn the idea into a practical application and make the Internet of Things a reality.

It is easy to program, create, and connect your things everywhere. LSN50 wireless part is based on SX1276 / SX1278 allows the user to send data and reach extremely long ranges at low data-rates.

LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node (915 MHz) - Click to Enlarge

It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

  • 1 x Dragino LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node (915 MHz)
  • 1 x External RF Antenna

Size

  • 13.0 x 5 x 4.5 cm

  • Maximum link budget: 168 dB
  • Constant RF output: +20 dBm – 100 mW
  • High efficiency PA: +14 dBm
  • Programmable bit rate: up to 300 kbps
  • High sensitivity: down to -148 dBm
  • Bullet-proof front end: IIP3 = -12.5 dBm
  • Excellent blocking immunity: Yes
  • Built-in bit synchronizer for clock recovery: Yes
  • Preamble detection: Yes
  • Dynamic Range RSSI: 127 dB

MCU

  • MCU: STM32L072CZT6
  • Flash: 192 KB
  • SRAM: 20 KB
  • EEPROM: 6 KB
  • Clock Speed: 32 Mhz

Absolute Maximum Ratings

  • VCC: 0.5 ~ 3.9 V
  • Operating Tempature: -40 ~ 85 °C
  • I/O pins: 0.5 ~ VCC+0.5 V

Common DC Characteristics

  • Supply Voltage: 1.8 ~ 3.6 V
  • Operating Tempature: -40 ~ 85 °C
  • I/O pins: Refer STM32L072CZT6 datasheet

Power Consumption

  • STOP Mode: 2.7μA at 3.3 V
  • RX Mode: 7.2 mA
  • TX Mode: 125 mA at 20 dbm

Battery

  • Li/SOCI2 unchargable battery
  • Capacity: 8500 mAh
  • Self Discharge: <1% / Year at 25 °C
  • Max continuously current: 130 mA
  • Max boost current: 2 A, 1 second
  • Device Weight: 150 g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “LSN50-V2 Waterproof Long Range Wireless LoRa Sensor Node (915 MHz)”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.