iFlight Taurus X8 Pro O3 8S HD Cinelifter (No Receiver, no Battery)
$3,144.79
Description
- iFlight Taurus X8 Pro O3 8S HD Cinelifter (No Receiver, no Battery)
- Designed for professional filmmakers
- Supports DSLR and cinema cameras
- Features DJI FPV HD transmission
- Max payload of 2kg with safety features
- Stabilizes shots with vibration reduction
The iFlight Taurus X8 Pro O3 8S HD Cinelifter (No Receiver, no Battery) is a sophisticated aerial platform designed for professional filmmakers and photographers. It is engineered to carry substantial payloads, including DSLR and cinema cameras such as the Red Komodo, Zcam, and BMPCC. This cine-lifter features DJI’s FPV HD transmission system, ensuring high-quality video feed and control.
The drone is equipped with eight single X-Class grade ESCs, providing maximum reliability and power, which is crucial for safely transporting expensive cinema equipment. In the event of an overload or failure, the remaining ESCs and motors are capable of returning the equipment safely. Additionally, the GPS rescue feature automatically takes control in case of signal interference or loss, guiding the drone back to its liftoff location until signal transmission is restored.
The integrated TPU landing gear offers adequate height for various terrains and provides protection during harder landings. The drone supports a maximum payload of 2kg, accommodating a range of top-mounted cameras. The stable mount can be finely adjusted to achieve a perfectly balanced center of gravity. The top-mounted 8S battery serves as both a power source and a counterweight, easily exchangeable via the iFlight battery quick-release mounting system.
The adjustable CNC aluminum camera mount allows for angles between 5 to 35 degrees, ensuring secure and reproducible outcomes. The silicon-ball-dampened carbon camera base is decoupled from the frame to minimize vibrations from motors and propellers, enhancing the quality of cinematic shots. For optimal results, additional software stabilization or a hardware module is recommended. Note: Ensure proper handling and operation to avoid damage to equipment and maintain safety.
- 1x Pre-built and Tested Taurus X8 Pro O3 BNF
- 8x HQ 8X4X3 CW propeller
- 8x HQ 8X4X3 CCW propeller
- 2x Albatross LHCP 5.8GHz SMA FPV Antenna
- 1x XT90 Male to XT60 Female Adapter Wire
- 2x iFlight Lipo Strap 20*400mm (Black)
- 2x iFlight Lipo Strap 20*500mm (Black)
- 1x CNC Aluminum alloy cam mount
- 1x XT90 Smart Smoke Stopper
- 1x Prop Wrench
- 428 x 249 x 74 mm
- Flight Controller: BLITZ F7 Pro
- Electronic Speed Controller: BLITZ E80 Single ESC with CNC Aluminum Cover
- Video Transmission: DJI O3 AIR Unit
- Motor: XING2 3314 900KV motors
- Propeller: HQ 8x4x3 propellers
- Maximum Speed: 150 km/h
- Maximum Takeoff Altitude: 3200 meters
- Maximum Hover Time: Approximately 5 minutes with 8S 5000mAh battery and 1.5 kg load
- Maximum Wind Speed Resistance: Level 8
- Operating Temperature Range: -10° to 40° C (14° to 104° F)
- Antennas: Dual Antennas
- GNSS: GPS, SBAS, Galileo, QZSS, Glonass
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.