Kitronik Robotics Board for Raspberry Pi Pico

• Kitronik Robotics Board for Raspberry Pi Pico
• Designed for Raspberry Pi Pico (Not Included)
• Offers a compact yet the feature-packed board
• Features an on or off switch and power status LED
• Communication: I2C
• Supply Voltage: 3 – 10.8 V

The Kitronik Robotics Board for Raspberry Pi Pico enables the Raspberry Pi Pico (connected via pin header) to drive 4 motors (or 2 stepper motors) and 8 servos. It also features 27 other I/O expansion points and Power and Ground connections.

The Robotics Board features 2 Dual H Bridge Motor Driver ICs. These are capable of driving 2 standard motors or 1 stepper motor each, with full forward, reverse, and stop control. There are also 8 servo outputs, capable of driving standard and continuous rotation servos.

Power is provided via either a terminal block or servo-style connector. The supply is then controlled by an on/off power switch to the board and there is also a green LED to indicate when the board has power. The board then produces a regulated 3.3 V supply which is fed into the 3 V and GND connections to power the connected Pico.