Lynxmotion SES-V2 High Torque Smart Servo (LSS-HT1)
$133.05
Description
- Lynxmotion SES-V2 High Torque Smart Servo (LSS-HT1)
- Features a configurable, modular smart servo motor
- Designed for the Lynxmotion Servo Erector Set (SES)
- Offers 60 RPM – no load (12 V)
- Includes metal gears, RGB LED bar, and sensor feedback
- Provides smart / wheel / RC modes
- Now with Full Aluminum Body (NEW)
The Lynxmotion SES-V2 High Torque Smart Servo (LSS-HT1) are new compact, modular actuators which were designed to be an evolution of the standard RC servo for use in multi-degree-of-freedom robots, animatronics, custom RC projects and more. The lineup currently includes three “smart servos” which differ in maximum torque and speed, and share the same dimensions, mounting points, and output spline.
The servos form the core modules of the next generation Lynxmotion Servo Erector Set (S.E.S.) and a wide variety of modular brackets, mechanics and electronics have been designed around them. “Smart” means each servos’ parameters are user-modifiable and configurable, there is sensor feedback (Voltage, Current, Temperature, Position, and RPM), built-in safety features, and although they work best when connected to a microcontroller or computer, can be used as advanced RC actuators.
The custom LSS serial protocol was built upon the SSC-32 / 32U protocol and makes communicating with and configuring the servos one of the easiest and most intuitive to use.
Note: The servo cannot be used on its own as no communication interface is included with the servo. The suggested serial interface is the
Lynxmotion’s Smart Servos are designed to be part of the Lynxmotion Servo Erector Set (SES) modular robot building system and are compatible with dozens of brackets and frame components.
The
The
Custom designed gears can be used to provide external gearing for the Lynxmotion Smart Servo (LSS) motors.
The
The
- 1x Lynxmotion Smart Servo – High Torque (HT1)
- 1x Aluminum driving horn (SES pattern) pre-assembled
- 1x Idler horn (SES pattern) pre-assembled
- 1x Cable: 150 mm long 4-pin Molex to 4-pin Molex
- 1x Cable: 150 mm long 4-pin Molex to 3-pin 2.54 mm “RC Standard” connector plus 2.54 mm single pin connector
Size
- 51 x 25 x 38.3 mm (case only)
- Nominal Voltage (recommended): 12 V (6 V min, 12.6 V max)
- Torque, max. static at 12 V: 29 kg-cm
- Torque, max dynamic at 12 V: 5.8 kg-cm
- Speed, no load at 12 V: 60 RPM
- Current, no load, standby at 12 V: 70 mA
- Current, stall at 12 V: 800 mA
- Operating temperature range: 45 ~85 °C
- Spline: 24 Teeth (compatible with Hitec standard spline)
- DC Motor: Coreless
- Gear ratio: 1:320
- Gear material: Steel
- Operating angle: 360° absolute and virtual multi-turn
- Communication type: TTL full duplex asynchronous serial or RC PWM.
- Communication protocol: Custom Lynxmotion Smart Servo (LSS)
- Baudrate range: 9600 bps ~ 921600 bps
- Baudrate (recommended) : 115200 bps
- Connector: Molex 4-pin, 2.54mm Low Profile (pinout: Rx | Vcc | GND | Tx)
- Weight: 79 g (without horns)
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.