goBILDA Dual 5A PWM Switch

• goBILDA Dual 5A PWM Switch
• Operates wirelessly for remote DC circuit control
• Adaptable 40mm square pattern for versatile mounting
• Handles a substantial 5A continuously per output
• Features built-in 6V BEC, supplying 1A continuously
• Connects to servo controllers, Arduinos, and PWM-capable devices

The goBILDA Dual 5A PWM Switch is a convenient solution for remotely controlling DC circuits. It operates by utilizing a wireless transmitter and receiver, or a servo controller of choice, to manage the circuits via a PWM signal. The state of the channels, whether on or off, is determined by the signal transmitted to the switch through the TJC8 servo connector. The options are as follows: both channels off at less than 1400 microseconds, one channel off and one on at 1400-1600 microseconds, or both channels on at more than 1600 microseconds.

Each output of the switch is capable of handling a substantial 5A continuously and a peak of 10A. The switch also features a 40mm square pattern, making it highly adaptable for mounting to nearly any goBILDA structure. For those utilizing an RC receiver, the 3-wire connector can be easily plugged into the desired channel. The switch also includes a built-in 6V BEC, capable of supplying 1A continuously, which powers the receiver via the red wire. Furthermore, the switch can be connected to a servo controller, an Arduino using jumper wires, or any device capable of producing a PWM signal.