Waveshare SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G/2G/GNSS (Southeast Asia, West Asia, Europe, Africa)

$79.85

Description

Description

  • Waveshare SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G/2G/GNSS (Southeast Asia, West Asia, Europe, Africa)
  • Supports LTE Cat-1, 3G, 2G, and GNSS positioning
  • Includes USB interface for command testing
  • Configures voltage to 3.3V or 5V with jumpers
  • Features onboard audio jack for calls
  • Compatible with Raspberry Pi and Jetson Nano

The Waveshare SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G/2G/GNSS (Southeast Asia, West Asia, Europe, Africa) is a versatile module designed to enhance connectivity and positioning capabilities for Raspberry Pi and compatible boards. It supports LTE Cat-1, 3G, and 2G communication, along with GNSS positioning, utilizing the SIM7600E module. This HAT facilitates a wide range of functionalities including dial-up, telephone calls, SMS, and internet protocols such as TCP, UDP, HTTP, and FTP.

The module is equipped with a GNSS receiver supporting multiple satellite systems like GPS, BeiDou, Glonass, GALILEO, and QZSS, ensuring precise positioning. It features an onboard USB interface for testing AT commands and obtaining GPS data, and includes a CP2102 USB to UART converter for serial debugging. The SIM card slot accommodates 1.8V/3V SIM cards, while a TF card slot is available for data storage.

Audio capabilities are supported through an onboard audio jack and decoder, allowing for telephone calls with features like echo cancellation and noise reduction. The module’s operating voltage can be configured to 3.3V or 5V, and it includes LED indicators for monitoring status. It is compatible with Raspberry Pi series boards and Jetson Nano, supporting dial-up on Windows and Linux with significant uplink and downlink speeds.

Note: Ensure proper handling of electronic components to avoid damage from static discharge.

  • 1x Waveshare SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G/2G/GNSS (Southeast Asia, West Asia, Europe, Africa)
  • 1x LTE antenna
  • 1x GPS external antenna (B)
  • 2x USB-A to Micro-B cable
  • 1x RPi screws pack (2pcs)

  • 56.21 x 65.15 mm

  • Supports dial-up, telephone calls, SMS, TCP, UDP, DTMF, HTTP, FTP, etc
  • Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
  • Onboard USB interface for testing AT Commands and obtaining GPS positioning data
  • Onboard CP2102 USB to UART converter for serial debugging
  • Breakout UART control pins for connection with host boards like Arduino/STM32
  • SIM card slot supporting 1.8V/3V SIM cards
  • TF card slot for storing data such as files and messages
  • Onboard audio jack and audio decoder for making telephone calls
  • Two LED indicators for easy monitoring of working status
  • Onboard voltage translator with configurable operating voltage to 3.3V or 5V via jumper
  • Baud rate: 300bps to 4Mbps (default: 115200bps)
  • Autobauding baud rate: 9600bps to 115200bps
  • Controlled via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • LTE Cat-1/3G/2G support
  • LTE Cat-1 LTE-TDD: B38 / B40 / B41
  • LTE-FDD: B1 / B3 / B5 / B7 / B8 / B20
  • 3G UMTS / HSPA+: B1 / B5 / B8
  • 2G GSM / GPRS / EDGE: 900 / 1800 MHz
  • GNSS Receiver type: 16-channel
  • Sensitivity: -159 dBm (GPS) / -158 dBm (GLONASS) / -159 dBm (BeiDou)
  • Cold starts: -148 dBm
  • Time-To-First-Fix (open air) Cold starts: <35s, Hot starts: <1s
  • SMS supported types: MT, MO, CB, Text, PDU
  • Storage: USIM card and ME (default)
  • Audio features: Supports echo cancellation and noise reduction
  • Power supply: 5V
  • Operating voltage: 5V / 3.3V (configured via jumper)
  • Operating temperature: -30°C to 80°C
  • Storage temperature: -45°C to 90°C
  • Standard Raspberry Pi 40PIN GPIO
  • Compatible with Raspberry Pi Series Boards and Jetson Nano
  • Dial-up on Windows/Linux
  • LTE Cat-1: Up to 5Mbps (Uplink) / Up to 10Mbps (Downlink)
  • 3G (HSPA+): Up to 5.76Mbps (Uplink) / Up to 42Mbps (Downlink)
  • Cloud communication: Supports communication protocols including TCP/UDP/FTP/FTPS/HTTP/HTTPS
  • Telephone call and SMS support: Making telephone calls or sending SMS via AT Commands with onboard audio jack
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Waveshare SIM7600E LTE Cat-1 HAT for Raspberry Pi, 3G/2G/GNSS (Southeast Asia, West Asia, Europe, Africa)”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.