12.3MP Camera Board for Nvidia Jetson Nano/Xavier NX, Raspberry Pi

• 12.3MP Camera Board for Nvidia Jetson Nano/Xavier NX, Raspberry Pi
• Offers better picture quality and lens flexibility
• No hardware modifications required
• Supports NVIDIA Argus camera plugin
• IR Sensitivity: Visible light
• Interface: 4-lane MIPI CSI-2

The 12.3MP Camera Board for Nvidia Jetson Nano/Xavier NX, Raspberry Pi camera module for Jetson Nano/Xavier NX, an IMX477 camera board with 3 hole pitches.

You can use this camera module on Jetson Nano/Xavier NX natively with ISP features. No hardware modifications are required, just install the driver and you are good to go.

This camera board features a  Can’t-Miss Update to IMX219 – Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. It has a maximum still resolution at 4056 x 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P.

Note: C/CS Lens is not included. Pi 2/3/4/Zero won’t work with it. Only the compute modules do. The camera driver MUST be installed. It can’t work on the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4).