Arduino Make Your UNO Kit

Arduino Make Your UNO Kit

• 1x Make Your UNO PCB
• 1x USB C Serial Adapter Board
• 7x Resistor 1k Ohm
• 2x Resistor 10k Ohm
• 2x Resistor 1M Ohm
• 1x Diode (1N4007)
• 1x 16 MHz Crystal
• 4x Yellow LED
• 1x Green LED
• 1x Push-Button
• 1x MOSFET
• 1x LDO (3.3 V)
• 1x LDO (5 V)
• 3x Ceramic Capacitor (22 pF)
• 3x Electrolytic Capacitor (47 uF)
• 7x Polyester Capacitor (100 nF)
• 1x Socket for ATMega 328p
• 2x I/O Connectors 
• 1x Connector Header 6 pins
• 1x Barrel Jack Connector
• 1x ATmega 328p Microcontroller

 Arduino Audio Synth

• 1x Audio Synth PCB 
• 1x Resistor 100k Ohm
• 1x Resistor 10 Ohm
• 1x Audio Amplifier (LM386)
• 1x Ceramic Capacitor (47 nF)
• 1x Electrolytic Capacitor (47 uF)
• 1x Electrolytic Capacitor (220 uF)
• 1x Polyester Capacitor (100 nF)
• 4x Connector Pin Header 
• 6x Potentiometer 10k Ohm with Plastic Knob

 Spare Parts

• 2x Electrolytic Capacitor (47 uF)
• 2x Polyester Capacitor (100 nF)
• 2x Ceramic Capacitor (22 pF)
• 1x Push-Button
• 1x Yellow LED
• 1x Green LED

 Mechanical Parts

• 5x Screw Nut
• 5x Spacer 12 mm
• 2x Screw 12 mm
• 11x Spacer 6 mm

Size

• Speaker Diameter: 45 mm

PDF Files

• Arduino Make Your UNO Kit – Datasheet
• Arduino Make Your UNO Kit – Schematics

ATMega328P Processor

• Memory: AVR CPU at up to 16 MHz | 32kB Flash | 2kB SRAM | 1kB EEPROM
• Security: Power On Reset (POR) | Brown Out Detection (BOD)

USB-C Serial PCB Board

• ATMega16U2 Processor: 8-bit AVR RISC-based microcontroller
• Memory: 16 KB ISP Flash | 512B EEPROM | 512B SRAM | debugWIRE interface for on-chip debugging and programming
• Power: 2.7 V – 5.5 V

Audio Synth Shield

• Potentiometers: 5x 10kΩ – Trimmer potentiometer – User programmable | 1x 10kΩ – Trimmer potentiometer – Directly connected to the audio amplifier

Audio

• Amplifier (LM386): Class-AB | 4Ω Load | 0.325 W
• Speaker (L50EJ): Impedance at 2kHz: 8Ω | Max Power 0.5 W | Output: 81 dB +-3 dB

• Weight: 48 g