Gravity CL2 Sensor (Calibrated) – I2C & UART

Original price was: $165.65.Current price is: $144.94.

Description

Description

  • Gravity CL2 Sensor (Calibrated) – I2C & UART
  • Offers high stability and high sensitivity
  • Detects chlorine (CL2) gas
  • Strong anti-interference ability
  • Supports three output modes analog, I2C, and UART
  • Working Voltage: 3.3 ~ 5.5 V DC

The Gravity CL2 Sensor (Calibrated) – I2C & UART detects chlorine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of chlorine in the environment. Can be widely used in the detection of chlorine in the chemical, pharmaceutical production, and environmental protection fields.

The probe adopts the electrochemical principle, has the characteristics of strong anti-interference ability, high stability, high sensitivity, etc., and the service life is as long as two years.

Gravity CL2 Sensor (Calibrated) - I2C & UART - Click to Enlarge

The sensor has 32 modifiable I2C addresses, an integrated temperature compensation algorithm, and a threshold alarm function, It has good compatibility with mainstream main control devices such as Arduino, ESP32, and Raspberry Pi. The easy-to-use Gravity interface, coupled with the sample code, can quickly build a chlorine concentration detector.

Gravity CL2 Sensor (Calibrated) - I2C & UART - Click to Enlarge

DFRobot has introduced 12 gas detection sensors in this series, CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, and HF, which are used in exactly the same way and data format, so you can combine them according to your needs.

  • 1x Gravity Chlorine Signal Conversion Board
  • 1x Chlorine Sensor Probe
  • 1x Gravity – 4-Pin Cable

Size

  • Adapter Plate size: 37 x 32 mm

  • Detection Gas: Chlorine (CL2)
  • Detection range: 0 ~ 10 ppm
  • Working Voltage: 3.3 ~ 5.5 V DC
  • Working Current: < 5 mA
  • Output Signal: I2C, UART (0 ~ 3 V), analog voltage
  • Working Temperature: -20 ~ 50 °C
  • Working Humidity: 15 ~ 90 % RH (non-condensing)
  • Storage Temperature: -20 ~ 50 °C
  • Storage Humidity: 15 ~ 90 % RH (non-condensing)
  • Lifespan: >2 years (in the air)
  • Compatibility: Arduino, ESP32, Raspberry Pi
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Gravity CL2 Sensor (Calibrated) – I2C & UART”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.