Industrial Grade SIM7600G-H 4G DTU, USB UART/RS232/RS485, LTE Global Band (US)

• 1x SIM7600G-H 4G DTU Main Unit
• 1x High Gain LTE MAIN Antenna (~ 3 m)
• 1x High Gain LTE AUX Antenna
• 1x GPS Antenna
• 1x Serial Cable male to female (~ 1.5 m)
• 1x USB-A to micro-B Cable (~ 1.2 m)

Size

• 83.5 x 104.5 mm (L x W)

Website

• Industrial Grade SIM7600G-H 4G DTU, USB UART/RS232/RS485, LTE Global Band (US) – Wiki

• Power input: connector: 7~36 V screw terminals or DC 12 V jack | protection: Schottky diode protection, reverse-proof
• Operating voltage: 7 ~ 36 V DC
• Operating current: idle: 10 ~ 30 mA at 12 V | transmit: 80 ~ 450 mA at 12 V (depending on the network condition)
• Indicator: PWR (power supply), RXD/TXD (UART RX/TX), NET (network), LINK (user-defined)
• Serial port baudrate: supports 300 bps ~ 921600 bps, 115200 bps by default
• Button: reset button
• SIM card: standard SIM card (1.8 V / 3 V)
• Antenna connector: MAIN LTE, AUX LTE, GNSS
• Operating temperature: -40 ~ 80 °C
• Weight: 522 g

Frequency Band

• 4G: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 | LTE-TDD: B34, B38, B39, B40, B41
• 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
• 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
• GNSS: GPS, Beidou, GLONASS, GALILEO, QZSS
• Applicable regions: Global support

Data Rate

• 4G (LTE Cat-4): 150 Mbps (DL) / 50 Mbps (UL)
• 3G (HSPA+): 42 Mbps (DL) / 5.76 Mbps (UL)
• 2G (EDGE): 236.8 Kbps (DL) / 236.8 Kbps (UL)
• 2G (GPRS): 85.6 Kbps (DL) / 85.6 Kbps (UL)

Software

• Communication protocol: TCP, IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNS (controlled via AT commands, with module Open
• Linux SDK for secondary development)
• OS support: Windows / Linux etc.

Hardware

Serial port

• RS232: connector: DB9 female | protection: TVS protection, anti-surge, ESD protection
• RS485: connector: screw terminals (A, B) | protection: 600 W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R balancing
• resistor solder pads)
• TTL (UART): operating voltage: 3.3 V or 5 V | connector: screw terminals (TXD, RXD, GND)

USB port

• Operating voltage: 5 V
• Connector: Micro USB
• Protection: ESD protection diode
• Usage: parameter configuration, dial-up, firmware upgrade