Maker Pi RP2040: Simplifying Robotics w/ Raspberry Pi RP2040

$12.10

Description

Description

  • Maker Pi RP2040: Simplifying Robotics w/ Raspberry Pi RP2040
  • Powered by Raspberry Pi RP2040
  • Comes with a dual-channel DC motor driver
  • Onboard DC motor driver
  • Built-in Quick Test buttons and motor output LEDs
  • Preloaded with CircuitPython by default

The Maker Pi RP2040: Simplifying Robotics w/ Raspberry Pi RP2040 features the first microcontroller designed by Raspberry Pi – RP2040, embedded on a robot controller board.

This board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors, ready for your next DIY robot/motion control project. Now you can build a robot while trying out the new RP2040 chip.

  • 1x Maker Pi RP2040
  • 4x Grove to Female Header Cable
  • 1x Mini Screwdriver
  • 1x Silicone Rubber Feet (Pack of 4)

Maker Pi RP2040: Simplifying Robotics w/ Raspberry Pi RP2040 - Click to Enlarge

Size

  • 88 x 64 x 13 mm (L x W x H)

  • Microcontroller: Raspberry Pi RP2040, dual-core Cortex M0+ at up to 133MHz clock, 264 KByte SRAM
  • Flash Size: 2 MByte O-SPI flash
  • Pre-loaded Programming Language: CircuitPython
  • USB Interface: USB 1.1 Device and Host
  • Power Switch: Yes
  • Reset Button: Yes
  • Push Button: 3x programmable push-button: BOOTSEL GP20 & GP21
  • Piezo Button: Yes, with a mute switch to GP22
  • Programmable LED: 13x Blue LED: GPO – GP7, GP16 – GP17 & GP26 – GP28
  • RGB LED (Neopixel): Two, connected to GP18
  • Servo Motor Port: 4x Servo motor port: GP12, GP13, GPU & GP15
  • Header Pin: No, except for servo ports
  • Micro SD socket: No
  • WIFI socket: No
  • Audio socket: No
  • Debug Port: Serial Wire Debug (SWD) Port

Power Input

  • 5 V via USB Micro B
  • 3.7 V via Li-Po/Li-Ion battery port
  • 3.6 V – 6 V via VIN terminal with automatic power input selection

DC Motor Terminal (motor driver)

  • Dual-channel H-bridge controls up to 2x
  • brushed DC motor or lx stepper motor
  • M1A:GP8 | M1B:GP9
  • M2A; GP10 I M2B: GP11

Grove Port (3.3V) (flexible I/O options: digital, analog, I2C, SPI, UART…)

  • GROVE 1: GPO, GP1
  • GROVE 2: GP2, GP3
  • GROVE 3: GP4, GP5
  • GROVE 4: GP16, GP17
  • GROVE 5: GP6, GP26
  • GROVE 6: GP26, GP27
  • GROVE 7: GP7, GP28
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Maker Pi RP2040: Simplifying Robotics w/ Raspberry Pi RP2040”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.