Sherline 2-Axis X/Y Manual Machine Slide (“)

• 1x Sherline 2-Axis X/Y Manual Machine Slide (“)
• 4x 35580 Hold-down clamp
• 2x 40510 10-32 x 3/8″ Socket Head Cap Screw
• 5x 40520 10-32 x 3/16″ Cup Point Set Screw
• 1x 40550 5/32″ hex key
• 1x 40570 3/32″ hex key
• 2x 40600 10-32 X 1/4″ Flat Point Set Screw
• 1x 40690 10-32 x 3/4″ Socket Head Cap Screw
• 1x 40760 Thumbscrew
• 2x 40820 Gib Lock
• 1x 40890 X-axis Slide Screw Nut
• 1x 45070 Teflon® Lock
• 1x 50130 X-axis Anti-backlash Nut
• 1x 50140 Y-axis Anti-backlash Nut
• 2x 50150 Backlash Lock Star Gear
• 1x 50161 Y-axis Leadscrew
• 1x 50171 13″ X-axis Leadscrew
• 1x 50190 Table Lock
• 1x 50200 Y-axis Slide Screw Nut
• 2x 50211 Button Head Socket Screw
• 1x 50910 Mill Saddle
• 1x 50920 Mill Saddle Oiler Body
• 1x 50930 Mill Saddle Oiler Cap
• 1x 65401 Industrial X/Y Base
• 1x 67017 Y-axis 2″ Industrial Handwheel
• 1x 67018 X-axis 2″ Industrial Handwheel
• 2x 67019 Industrial Handwheel Thrust Collar
• 1x 67050 13″ Mill Table
• 1x 67106 X-axis Preload Nut (RH)
• 1x 67107 Y-axis Preload Nut (LH)
• 4x 67111 8-32 x 3/4″ Socket Head Cap Screw
• 2x 67115 5-40 x 7/8″ Socket Head Cap Screw

• Table size: 13 x 2.75″ (330 x 70 mm)
• Table height: 2.8″ (71.1 mm)
• X-axis travel: 9.0″ (228 mm)
• Y-axis travel: 4.1″ (104 mm)

PDF File

• Sherline 2-Axis X/Y Manual Machine Slide (“) – Instructions PDF

ZIP File

• Sherline 2-Axis X/Y Manual Machine Slide (“) – 3D IGS Model

• Manufactured from 6061-T6 aluminum with a black anodized coating
• Inch leadscrew option
• Precision rolled steel leadscrews
• Adjustable leadscrew backlash
• Dovetailed tables and saddles with adjustable gibs
• Handwheels graduated in .001″ increments on inch slides
• Mounting provisions from the bottom with four 1/4-20 holes or from the top using angle clamps
• Weight capacity of approximately 10 lbs
• Duty cycle of 2080 hours under heavy use
• Do not use WD40 as a lubricant