VINT Hub Phidget
$42.35
Description
- VINT Hub Phidget
- Features six versatile I/O ports
- Easy to use
- Analog sensor compatible
- Digital I/O mode
- Note: Cable not included
With the VINT Hub Phidget, you can interface six devices to your computer through a single USB port. Each VINT port can perform one of four roles: Communicating with an intelligent VINT Device, reading a 0-5V Voltage or ratiometric sensor, acting as a digital output, or reading switches as a digital input. Each port has a power and ground pin, so you can also use the ports to gain access to the USB voltage supply directly. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.
VINT Devices are ‘plug and program’: automatically discovered by the Phidget API with the same ease of programming you’ve come to expect from Phidgets. Each VINT device has a full API with functions and events to make programming a snap.
Sometimes, you just need a few simple analog voltage sensors. Luckily, your collection of Phidget Analog Input sensors is not obsolete; each port on the USB VINT Hub can interface a 0-5 V sensor. The VINT Port is backwards compatible with both ratiometric and non-ratiometric Phidget analog sensors.
In digital output mode, a VINT port can be used to drive LEDs, relays, digital circuits, and other simple electronics. Each port is PWM-enabled, allowing you to dim LEDs to a specific brightness. Wire a switch or sensor contact directly into a VINT Port, and use the Digital Input mode to read the state of the switch. If you need more than six inputs or outputs, you can expand by attaching a VINT I/O module. For example, there are VINT digital output modules with 16 outputs, allowing 96 digital outputs on a single VINT HUB Phidget! See the “Compatible Products” tab for a list of modules.
- VINT Hub Phidget
- Note: Cable not included
Board
- Controlled By: USB
- Number of VINT Ports: 6
Electrical Properties
- USB Voltage Min: 4.5 V DC
- USB Voltage Max: 5.3 V DC
- USB Speed: High Speed
- Current Consumption Min: 32.5 mA
- Available External Current: 470 mA
Voltage Inputs
- Voltage Input Resolution: * 16 bit
- Sensor Input Impedance: 324 kΩ
- Input Voltage Min (DC): 0 V DC
- Input Voltage Max (DC): 5 V DC
- Voltage Input Noise: ± 630 μV DC
- Sampling Interval Max: 60 s/sample
- Number of Voltage Inputs: 6 (Shared)
- Sampling Interval Min: 1 ms/sample
- Voltage Noise: 1.3 mV DC
Digital Inputs
- Pull-up Resistance: 124 kΩ
- Low Voltage Max (True): 1 V DC
- High Voltage Min (False): 1.8 V DC
- Low Voltage Trigger Length Min: 3 ms
- High Voltage Trigger Length Min: 3 ms
- Digital Input Voltage Max: 5.5 V DC
- Digital Input Type: Switch (Active Low)
- Number of Digital Inputs: 6 (Shared)
Digital Outputs
- Series Resistance: 510 Ω
- Digital Output Available Current: 8.1 mA
- Digital Output Voltage Min: 0 V DC
- Digital Output Voltage Max: 3.3 V DC
- PWM Frequency Max: 50 kHz
- PWM Resolution: 0.8 %
- Number of Digital Outputs: 6 (Shared)
Physical Properties
- Operating Temperature Min: -40 °C
- Operating Temperature Max: 85 °C
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.