Waveshare Flexible E-Ink Display HAT for Raspberry Pi, 296×128, 2.9″

$25.40

Description

Description

  • Waveshare Flexible E-Ink Display HAT for Raspberry Pi, 296×128, 2.9″
  • Features flexible 2.9″ e-ink display with 296×128 resolution
  • Supports Raspberry Pi, Arduino, and STM32 via SPI
  • Consumes power only during refresh, maintaining content offline
  • Provides over 170° viewing angle, paper-like experience
  • Includes online resources with examples for multiple platforms

The Waveshare Flexible E-Ink Display HAT for Raspberry Pi, 296×128, 2.9″ is a versatile and innovative display solution designed for integration with Raspberry Pi and other compatible boards. This flexible e-paper display offers a resolution of 296×128 pixels and supports black and white dual-color output. It is characterized by its low power consumption, requiring energy only during the refresh process, and maintains the last displayed content even when powered down. The display is passively reflective, relying on ambient light to provide a paper-like viewing experience with a wide angle of over 170 degrees.

This display is particularly suitable for applications in industrial instruments and smart wearable devices, where its bendable nature and ultra-low power requirements are advantageous. The panel’s flexibility allows it to be bent without damage, although care must be taken not to bend the FPC section. The device communicates via an SPI interface, making it compatible with a range of controller boards, including Arduino and STM32, in addition to Raspberry Pi and Jetson Nano.

The HAT includes an onboard voltage translator, ensuring compatibility with both 3.3V and 5V microcontrollers. It comes with comprehensive online development resources and a manual, providing examples for various platforms. This makes it an ideal choice for developers seeking a reliable and efficient display solution for a variety of applications.

  • 1x Waveshare Flexible E-Ink Display HAT for Raspberry Pi, 296×128, 2.9″
  • 1x 2.9-inch e-Paper (D)
  • 1x e-Paper Driver HAT
  • 1x RPi Screws Pack (2pcs)
  • 1x GH1.25 9pin Cable ~20cm

  • Outline Dimensions: 79.0 x 36.7 mm
  • Display Size: 66.90 x 29.06 mm

Side View of 2.9inch Flexible E-Ink Display HAT - Dimensions

  • Resolution: 296×128 pixels
  • Viewing angle: >170°
  • Display color: Black/White
  • Grey scale: 2
  • Communication: SPI
  • Display panel: E-paper
  • Experience: Paper-like
  • Environment: Ambient light required
  • Display type: Passively reflective
  • Refreshing: Partial refresh support
  • Panel feature: Flexible
  • No backlight; retains last content for a long time even when powered down
  • Ultra-low power consumption; power is mainly required for refreshing
  • Standard Raspberry Pi 40-pin GPIO extension header; supports Raspberry Pi series boards and Jetson Nano
  • SPI interface for connecting with other controller boards like Arduino/STM32
  • Onboard voltage translator; compatible with 3.3V / 5V MCUs
  • Includes online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Operating voltage: 3.3V / 5V
  • Interface: 3-wire SPI, 4-wire SPI
  • Dot pitch: 0.227 × 0.226mm
  • Refresh power: 26.4mW (typical)
  • Standby current: <0.01uA (almost none)
  • E-paper display utilizes microcapsule electrophoretic technology
  • Displays images/texts clearly under lamplight or natural light
  • Features nearly up to 180° viewing angle
  • Flexible panel allows bending without damage; thinner and lighter
  • Onboard SPI control interface for use with other controller boards like Raspberry Pi/Jetson Nano/STM32/Arduino
  • VCC: 3.3V/5V
  • GND: Ground
  • DIN: SPI MOSI pin
  • CLK: SPI SCK pin
  • CS: SPI chip selection, low active
  • DC: Data/Command selection (high for data, low for command)
  • RST: External reset, low active
  • BUSY: Busy status output
  • PWR: Power on/off control
  • Application examples: Suitable for price tags, asset/equipment tags, shelf labels, conference name tags
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Waveshare Flexible E-Ink Display HAT for Raspberry Pi, 296×128, 2.9″”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.