Waveshare Industrial Grade CAN FD Bus Data Analyzer, USB to CAN FD Adapter, CAN FD Interface Card

• 1x USB type A plug to type B plug cable
• 1x 4-pin cable
• 1x Screwdriver

USB-CAN-FD or USB-CAN-FD-B

• 104 x 70 x 25 mm

Website

• Industrial-grade USB to CAN FD interface converter, CAN FD bus communication interface card, CAN FD protocol data analyzer
• Operating voltage: 5V, powered directly by USB port without external power supply
• USB Connector: USB-B
• Dual-channel CAN FD (CAN1 and CAN2), independent and fully isolated voltage: 3000V DC
• CAN bus screw terminal: OPEN6 with 5.08mm pitch
• Each CAN FD channel has two built-in 120Ω terminal resistors, enabled by switch
• Baud Rate: 100Kbps to 5Mbps, configurable via software
• Protocol Support: CAN2.0A, CAN2.0B, and ISO 11898-1 CAN FD protocol V.1.0
• Transfer speed: Receiving speed of 20000 frames/s and sending speed of 5000 frames/s per CAN FD channel
• Transmit buffer: 1500 frames receiving buffer and 64 frames sending buffer per channel, with automatic retransmission on failure
• Indicators: Power indicator, System status indicator, CAN1 channel indicator, CAN2 channel indicator
• System support: Windows XP/7/8/10/11 (32/64 bits); Linux not supported
• Operating temperature: -40 to 85°C
• Case material: Aluminum alloy with 3D flame-retardant insulating sheets on both sides
• Supports protocol conversion between USB and CAN FD bus
• Onboard high-speed USB2.0 interface and 2-channel CAN FD bus interfaces, supporting bi-directional transmission
• Programmable baud rate with automatic detection
• Supports decoding and analyzing for multiple CAN protocols
• Supports multiple development environments
• High-performance hardware solution
• Equipped with electrical isolation and multiple protection circuits
• Supports one PC with multiple devices