Waveshare NB-IoT HAT for Raspberry Pi (Europe, Asia, Africa, Australia)

• 1x Waveshare NB-IoT HAT for Raspberry Pi (Europe, Asia, Africa, Australia)
• 1x SIM7020E NB-IoT HAT
• 1x Antenna
• 1x USB Type A plug to Micro plug cable
• 1x RPi screws pack (2pcs)

• 30.5 x 65.0 mm

Website

• Standard Raspberry Pi 40-pin GPIO extension header, compatible with Raspberry Pi series boards and Jetson Nano
• Supports communication protocols: LWM2M, COAP, MQTT, TCP, UDP, HTTP, HTTPS
• Onboard USB interface for power supply or debugging
• Breakout UART control pins for connection with host boards like Arduino and STM32
• Onboard voltage translator, 3.3V by default, switchable to 5V via onboard jumper
• SIM card slot supporting NB-IoT specific cards
• Two LED indicators for easy monitoring of working status
• Baud rate: 300bps to 921600bps (115200bps by default)
• Controlled via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)
• Includes development resources and manual with examples for Raspberry Pi, Jetson Nano, Arduino, STM32, and Python
• Band: FDD-LTE B1, B3, B5, B8, B20, B28
• Data rate: Uplink ≤ 62.5Kbps, Downlink ≤ 26.15Kbps
• SMS: Text mode and PDU mode (depends on the NB card)
• Power supply: 5V
• Logic level: 5V/3.3V (3.3V by default)
• Overall current in idle mode: ~18mA
• Single module current (VBAT=3.3V): Idle mode: 5.6mA, Sleep mode: 0.4mA, PSM mode: 5µA, eDRX mode: 70µA (eDRX=655.36s)