Arducam 1MP*4 Quadrascopic Monochrome Camera Bundle Kit

• 4x 1MP OV9281 global shutter camera module with low distortion M12 lens
• 1x Arducam Camarray quadrascopic stereo camera HAT
• 4x 150 mm / 6 inch 22-pin to 22–pin camera cable
• 1x 300 mm / 12 inch 15-pin to 22-pin camera cable
• 1x 73 mm / 2.87 inch 15-pin to 22-pin camera cable
• 4x M2.5 x 10 mm Nylon Hex Standoff
• 4x M2.5 Nylon Nut
• 4x M2.5 x 6 mm Nylon Screw

Size

• Lens: 14 x 15.6 mm
• Board Size: 40 x 40 mm
• HAT Size: 65 x 56 mm

Camera

• Sensor: Monochrome global shutter OV9281
• Pixel Size: 3 μm x 3 μm
• Active Array Size: 1280 x 800
• Optical Size: 1/4 inch
• Focusing Range: 30 mm ~ infinite
• IR Sensitive: No IR filter, sensitive to IR
• Output interface: 2-lane MIPI serial output
• Video Modes: 8-bit RAW, 45fps at 1280*4 x 800 with Arducam driver on Jetson Nano/Xavier NX; 30fps at 1280*4 x 800 with Arducam driver on Rpi

Lens

• Optical Format: 1/2.7 inch
• Distortion: <1%
• Effective Focal Length: 2.8 mm
• FOV on 1/4 inch RPi Camera: 75° (H)
• F/NO: 2.8
• Mount: M12
• Weight: 4 g

Camarray Quadrascopic Stereo Camera HAT

• Support Raspberry Pi 3B/3B+/4B and Jetson Nano/NX
• Two/Three/Four MIPI camera inputs and one MIPI camera output
• Support 1/2 lane MIPI cameras input up to 1Gbps/lane
• Support 2 lane MIPI output up to 1Gbps/lane
• Support RAW8/RAW10/RAW12 output format, the output format automatically changes with the input format
• Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
• Support Arducam cameras up to 12MP with proprietary camera driver with full resolution combine
• Support Two/Three/Four MIPI camera side-by-side combine, channel 0/1/2/3 software switching on the fly