Cytron CM4 Maker Board Carrier Raspberry Pi CM4 (Board Only)
$56.00
Description
- Cytron Cm4 Maker Board Carrier Raspberry Pi CM4 (Board Only)
- Equipped with a variety of features including 10x GPIO LED, a microSD Card Slot, and a CSI Camera Port
- Offers cost-sensitive applications without the eMMC fitted, known as the CM4Lite
- Features new interfaces such as a second HDMI, PCIe, and Ethernet
The Cytron Cm4 Maker Board Carrier Raspberry Pi CM4 (Board Only) is a carrier board specifically designed for the Raspberry Pi Compute Module 4 (CM4). This product was officially introduced to the market on the 19th of October, 2020, and is available in 32 different variants. The CM4 and its counterpart, the Compute Module 4 Lite (CM4Lite), are loosely based on the Raspberry Pi 4 Model B.
The CM4 offers an option for cost-sensitive applications to be supplied without the eMMC fitted, a version known as the CM4Lite. The form factor of the CM4 and CM4L differs from previous Compute modules due to the addition of new interfaces such as a second HDMI, PCIe, and Ethernet. The electrical interface of the CM4 is facilitated through two 100-pin high-density connectors. The total footprint of the CM4, including the socket, is smaller due to the new form factor design.
The CM4 Maker Board is equipped with a variety of features including 10x GPIO LED, a microSD Card Slot, a CSI Camera Port, a DSI Display Port, 5x Grove Ports, 2x GPIO Ports, a PWM Port, a UART Port, an I2C Port, a Maker Port, 3x User Buttons, an Analog Audio Out, a Piezo Buzzer, a Buzzer Mute Switch, 2x Power Buttons, an RTC Battery Holder, a PCF85063A RTC, an External Power Button Header, a Boot Switch, an M.2 Connector, 2x M.2 Mounting Hole, a USB-C, an HDMI, 4x USB 2.0 Host, a Gigabit Ethernet, a CM4 Socket, GPIOs Breakout, a DC Power Jack, and 4x Status LEDs.
- 1x CM4 Maker Board
- 4x Silicone Bumper
- 10x GPIO LED
- 1x microSD Card Slot
- 1x CSI Camera Port
- 1x DSI Display Port
- 5x Grove Port
- 2x GPIO Port (GPIO 5, 6 & 23, 24)
- 1x PWM Port (GPIO 12, 13)
- 1x UART Port (GPIO 14, 15)
- 1x I2C Port (GPIO 2, 3)
- 1x Maker Port (JST-SH 4-Ways Connector)
- 3x User Button
- 1x Analog Audio Out
- 1x Piezo Buzzer
- 1x Buzzer Mute Switch
- 2x Power Button
- 1x RTC Battery Holder
- 1x PCF85063A RTC (Note: DSI & CSI are prohibited when using RTC)
- 1x External Power Button Header
- 1x Boot Switch
- 1x M.2 Connector
- 2x M.2 Mounting Hole
- 1x USB-C
- 1x HDMI
- 4x USB 2.0 Host
- 1x Gigabit Ethernet
- 1x CM4 Socket
- GPIOs Breakout
- 1x DC Power Jack
- 4x Status LED
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.