Lynxmotion Hunter VTail 500 Drone (Base Combo Kit)
$396.60
Description
- High-performance Hunter VTail 500 drone with two angled rear propellers
- “Plug and play” for easy solder-less assembly
- Frame made with rigid and lightweight G10 fiberglass
- Includes standard brushless motors, speed controllers and propellers
- Requires flight controller, battery, charger and remote (TX/RX)
Verify your country’s laws and regulations for Drone and Unmanned Aircrafts use. Registration of Unmanned Aircrafts is made mandatory in many countries and you are responsible to verify and to comply these regulations.
The Lynxmotion Hunter VTail 500 Drone (Base Combo Kit) is a high performance quadcopter. Unlike other ‘x’ (where the front of the UAV is facing between two legs) or ‘+’ (where the front is facing one of the legs) quadcopters and Y-shaped tricopters, the VTail concept uses two angled rear propellers, merging both concepts.
Many tricopter designs use a servo to angle the rear propeller to rotate the aircraft clockwise / counter-clockwise, and have an issue with asymmetry (only two propellers can counter-rotate while the third causes a bit of rotation). A 6-rotor tricopter solves the symmetry issue, but is more expensive as it requires three additional motors and ESCs.
The Mechanics
The frame uses G10 fiberglass composite which is incredibly rigid and lightweight and offers significant price advantages over carbon fibre. The hardware is entirely metal, using lightweight aluminium standoffs, steel screws and lock nuts.
Electronics
This kit requires a controller which is VTail compatible. The controller’s function is to stabilize the quadcopter using onboard sensors (usually a multi-axis gyroscope and/or accelerometer). You can incorporate your own controller which uses a standard 30mm x 30mm or 45mm x 45mm mounting hole pattern (and includes compatibility for VTail designs).
The VTail 500 is larger than the VTail 400. The “400” refers to the diameter of the circle which passes through all four motors and is commonly used as a size reference for multi-rotor UAVs.
Note: Optional Vtail 500 Canopy sold as a separate accessory.
Note: Optional VTail 500 Sticker Kits sold as a separate accessory in the VTail category. Multiple colors available.
 |
 |
 |
 |
 |
Lynxmotion Hunter VTail 500 Drone Kit (Hardware Only) - All G10 (Fiberglass) frame parts to build a VTail 500 frame
- Complete Hardware Bag
- 2x Lynxmotion Battery Velcro Strap
- 4x
Brushless Rotor Motor 930Kv 28.9A - 4x
Lynxmotion 30A Multirotor ESC 1A BEC (With Connectors) - 2x Pair of 10×4.5 Clockwise Propellers
- 2x Pair of 10×4.5 Counter Clockwise Propellers
- 1x Power Wiring Harness
- 1x Receiver to Flight Controller Wiring Harness
Note: Propeller colors might change without notice (usually two pair of black and two of orange)
Requires (sold separately)
- Flight Controller (
Lynxmotion Nano Drone/UAV Flight Controller (with GPS) ) - Battery: 11.1V (3S), 20C (min) 2800mAh (min)
- 5 channel remote control (programming ESCs is needed)
- Size (Overall): 43 x 47.3 x 15.7 cm (L x W H)
- Weight: 365g
Motor Specifications:
- Optimized for 2-4S LiPo Cells (11.1 to 14.8 V nominal)
- Kv: 930 (RPM/Volt)
- Max Continuous current: 28.9 A
- Dimensions: 27.7 x 37 mm
- Weight: 74g
- 4 mm bullet connectors
- 350 mm wires length
Electronic Speed Controller Specifications:
- 30A continuous discharge, 40A burst
- Ideal for 2-4S LiPo, 6-12 Cells NiMh
- Provides 5V, 1A Linear Mode BEC
- High speed SimonK Firmware for MultiRotors
- Programmable via RC Transmitter
- Deans connector for power input
- 4mm female bullet connectors for motors
- 200mm long signal wires with JR (servo) connection
- 125mm long power wires
- 35mm long motor wires
- Size: 27 x 22 x 7 mm
- Weight: 9g
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.