Lynxmotion SSC-32 Servo Controller
$39.95
Description
- Lynxmotion SSC-32 Servo Controller
- Controls up to 32 servo motors
- Comes preassembled
- Serial interface (TTL or RS-232)
- Bidirectional communication with Query commands
This product is discontinued and replaced byÂ
The Lynxmotion SSC-32 Servo Controller is a small preassembled servo controller with some big features. It has high resolution (1uS) for accurate positioning, and extremely smooth moves. The range is 0.50mS to 2.50mS for a range of about 180°. The motion control can be immediate response, speed controlled, timed motion, or a combination. A unique “Group Move” allows any combination of servos to begin and end motion at the same time, even if the servos have to move different distances. This is a very powerful feature for creating complex walking gaits for multi servo walking robots. The servo’s position or movement can be Queried to provide feedback to the host computer.
There is even a 12 servo Hexapod sequencer built in. This allows complete control of all aspects of the alternating tripod gait simply by transferring a few values from the host controller. Any output can be used as a TTL level output. There are 4 digital inputs that are static or latched, so you don’t have to worry about missing a short event. They can also be used as analog inputs. There are three terminal blocks for powering options. The DB9 input has true RS-232 levels for use with a PC.
Features:
• 32 channels of 1uS resolution servo control
• Bidirectional communication with Query commands
• Synchronized, or “Group” moves
• 12 Servo Hexapod Gait Sequencer built in
• MiniSSC-II emulation, like having 4 of them
SSC-32 Servo Sequencer Utility (created using FlowBotics Studio)
The Lynxmotion SSC-32 Servo Controller board can be easily controlled with the new SSC-32 Servo Sequencer Utility. It is available as a free downloadable utility which makes it easy to experiment with robotics and animatronics. It can be found in the Useful Links section.
This utility is an example of the type of program which can be built using
PDF Files
• Users Guide
• SSC-32 General Purpose Sequencer
ZIP Files
• SSC-32 Firmware for Atmega168 (v2) Chip
• SSC-32 Firmware for Atmega8 (v1) Chip
FREE Utility
•
Website
• Lynxmotion User and Assembly Guides
• Blog Post: Guide to the Power Supply Options for Lynxmotion Controllers
These specifications pertain to firmware version 2.01XE:
• Microcontroller: Atmel ATMEGA168-20PU
• EEPROM: 24LC32P (Required for 2.01GP)
• Speed: 14.75 MHz
• Internal Sequencer: 12 Servo Hexapod (Alternating Tripod)
• Serial input: True RS-232 or TTL, 2400, 9600, 38.4k, 115.2k, N81
• Outputs: 32 (Servo or TTL)
• Inputs: 4 (Static or Latching, Analog or Digital)
• Current requirements: 31mA
• PC interface: DB9F
• Microcontroller interface: Header posts
• Servo control: Up to 32 servos plug in directly
• Servo type supported: Futaba or Hitec
• Servo travel range: 180°
• Servo resolution: 1uS, .09°
• Servo speed resolution: 1uS / Second
• Servo motion control: Immediate, Timed, Speed or Synchronized.
• PC board size: 3.0″ x 2.3″
• VS peak current: max 15 amps per side
• VS steady current = max 3-5 amps per side recommended.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.