Sherline 2-Axis X/Y Manual Machine Slide 18″ (“)

• 1x Sherline 2-Axis X/Y Manual Machine Slide 18″
• 4x 35580 Hold-down clamp
• 1x 40280 Thrust collar (18″ table only)
• 2x 40510 10-32 x 3/8″ Socket Head Cap Screw
• 5x 40520 10-32 x 3/16″ Cup Point Set Screw
• 1x 40530 5-40 X 3/8″ Socket Head Cap Screw (18″ table only)
• 1x 40550 5/32″ hex key
• 1x 40570 3/32″ hex key
• 2x 40600 10-32 X 1/4″ Flat Point Set Screw
• 1x 40690 10-32 x 3/4″ Socket Head Cap Screw
• 1x 40760 Thumbscrew
• 2x 40820 Gib Lock
• 1x 40890 (41890 Metric) X-axis Slide Screw Nut
• 2x 40890 Gib
• 1x 45070 Teflon® Lock
• 1x 50130 (51130 Metric) X-axis Anti-backlash Nut
• 1x 50140 (51140 Metric) Y-axis Anti-backlash Nut
• 2x 50150 Backlash Lock Star Gear
• 1x 50161 (51161 Metric) Y-axis Leadscrew
• 1x 50173 (51173 Metric) 18″ X-axis Leadscrew
• 1x 50190 Table Lock
• 1x 50200 (51200 Metric) Y-axis Slide Screw Nut
• 2x 50211 Button Head Socket Screw
• 1x 50910 Mill Saddle
• 1x 50920 Mill Saddle Oiler Body
• 1x 50930 Mill Saddle Oiler Cap
• 1x 54182 18″ Mill Table
• 1x 54183 18″ Table Leadscrew Bushing
• 1x 65401 Industrial X/Y Base
• 1x 67017 (670171 Metric) Y-axis 2″ Industrial Handwheel
• 1x 67018 (670181 Metric) X-axis 2″ Industrial Handwheel
• 2x 67019 Industrial Handwheel Thrust Collar
• 1x 67106 (67108 Metric) X-axis Preload Nut (RH)
• 1x 67107 (67109 Metric) Y-axis Preload Nut (LH)
• 4x 67111 8-32 x 3/4″ Socket Head Cap Screw
• 2x 67115 5-40 x 7/8″ Socket Head Cap Screw

• Table size: 18 x 2.75″ (458 x 70 mm)
• Table height: 2.8″ (71.1 mm)
• X-axis travel: 13.38″ (340 mm)
• Y-axis travel: 4.1″ (104 mm)

PDF File

• Sherline 2-Axis X/Y Manual Machine Slide 18″ (“) – Instructions PDF

ZIP Files

• Sherline 2-Axis X/Y Manual Machine Slide 18″ (“) – 3D IGS Model
• Sherline 2-Axis X/Y Manual Machine Slide 18″ (“) – 18-Inch 3D Model

• Manufactured from 6061-T6 aluminum with a black anodized coating
• Available with inch or metric leadscrew
• Precision-rolled steel leadscrews
• Adjustable leadscrew backlash
• Dovetailed tables and saddles with adjustable gibs
• Handwheels graduated in .001″ increments on inch slides and .01 mm increments on metric slides
• Weight capacity approximately 10 lbs, depending on weight location
• Duty cycle of 2080 hours under heavy use
• Mounting provisions from the bottom with four 1/4-20 holes or from the top using four angle clamps
• Handwheel: 2″ laser-engraved aluminum with two pre-loaded ball bearings
• Hold-down provision: 2 T-slots
• Mounting provision: 4 holes 1/4-20 in the bottom of the base plus a slot for angle clamps